Insertion Style
Water Cut Analyzer

Model Number:
Configuration:
Pipeline Diameter:
Starting From:
DC-3510
Insertion
3" and larger
$16,220
GET CUSTOM QUOTEDOWNLOAD BROCHURE
*all prices shown are in USD
The DC 3510 Insertion water cut meter can be used in medium to high volume crude oil, condensate or refined petroleum applications with flow rates above 200 m3 per day. This model is suitable for pipelines with a 3” diameter or greater with vertical or horizontal mounting, perpendicular or parallel to the flow direction. The 3510 is available in 2″ to 8″ flange sizes with 150#-1500# ratings. An 1 1/4″ NPT version is also available.

General Information

+

TARGET FLOW RATES: 1m³ to 10m³ per hour (either direction)
ORIENTATION: Horizontal preferred (to avoid water and gas traps)
PIPELINE DIAMETER:  3" and larger
PROBE LENGTH: 20" Standard (14" and 16" optional)
PROCESS CONNECTIONS: 1 1/2" NPT, 2" to 8" Flanged - 150# to 1500# ANSI

Specifications

+

OPERATING PRINCIPLE: Advanced Digital Capacitance
WATER IN OIL RANGE: 0-50% (Standard) 0-90% (SAGD)
RESOLUTION:  0.001%
REPEATABILITY AND PRECISION: Up to 0.01%
TEMPERATURE VARIATIONS: Auto-Compensated from 0°C to 260°C
STANDARD WETTED PARTS: 316/316L SS
OPTIONAL WETTED PARTS: Duplex 2205, Inconel 625, Monel 400, Super Duplex 2507
STANDARD O-RING MATERIAL: Viton A
OPTIONAL O-RING MATERIAL: Nitrile, PTFE, Kalrez
STANDARD PROCESS FLUID TEMPERATURE: 135°C Maximum
OPTIONAL PROCESS FLUID TEMPERATURE: 260°C Maximum
AMBIENT TEMPERATURE (ELECTRONICS): -40 to 85°C
TRANSMITTER MOUNTING: Integral with sensor
STANDARD ELECTRICAL ENCLOSURE: Anodized Aluminum
OPTIONAL ELECTRICAL ENCLOSURE: 316/316L SS
CORROSION PROTECTION: NACE MR-0175/ISO 15156 2009, Sour service compliant
HAZARDOUS AREA CLASS: ETL: Class I, Zone 1, Ex d IIB; ATEX: Ex II 2 G, Ex d IIB T4 Gb; IECEx: Ex d IIB T4 Gb
STANDARD TEMPERATURE CLASS: T4 @ Max 135°C Process Fluid Temp.
HIGH TEMPERATURE CLASS: T140°C @ Max 260°C Process Fluid Temp.
INGRESS PROTECTION: IP66
CRN'S: Alberta, Manitoba
POWER SUPPLY: 24VDC @ 150mA floating
ELECTRICAL CONNECTIONS: (1) 1" NPT & (1) M25
HUMIDITY PROTECTION: Conformal coated CB
ANALOG: 4-20mA DC, isolated, self-powered
RS-232: 9600 baud, max. 100m
RS-485: 9600 baud, max. 1500m
MAXIMUM LOAD: 600 ohm load to control room
ISOLATION VOLTAGE: 500 volts peak
RELAY CONTACTS: SPST-NO 2A @ 24 VDC, non-inductive
ADJUSTABLE DELAY: One second increments
ACCESSORIES: Data Logger, 4-20mA Digital Loop Indicator

Installation Examples

+
View Diagram
View Diagram
View Diagram